We realized that your billing location is USA.
Please note that your billing address should be in the same country as your buying location. Please select one of the options:
New Terms of Use
The Subscription Term will automatically renew for successive Subscription Terms unless either party notifies the other at least 60 days prior to the end of the then-current Subscription Term that it has elected not to renew. Any renewed Subscription Term will be the same length as the preceding term or 12 months, whichever is greater. The fees for any renewed Subscription Term will be the same as those in effect at the end of the preceding Subscription Term, unless Siemens notifies Customer about different future fees at least 90 days prior to the end of the then-current Subscription Term.
The UCA (or any successor terms) available at Universal Customer Agreement (UCA) in the version that is current 60 days prior to the end of the then-current Subscription Term will apply for the following Subscription Term. However, if your subscription is governed by a master agreement that you have executed with Siemens, then that master agreement will continue to apply for any following Subscription Term, and auto-renewal terms for the subscription specified in that master agreement will prevail.
In all cases, instead of any previous versions of Supplemental Terms, the applicable Supplemental Terms available at Supplemental Terms in the version that is current 60 days prior to the end of the then-current Subscription Term will apply for the following Subscription Term.
Additional terms and conditions agreed upon in the initial order form (including product-specific terms), as well as agreed payment terms, will remain in effect for any following Subscription Term.
Additional Requirements
Hardware Demands
Industrial Edge Management License
Industrial Edge Devices and Industrial Edge Virtual Device
TRCDATA in Industry Mall (For using high-speed-adapter)
IIH Essentials (For using low-speed-adapter in combination with other IE apps)
IIoT option module(OM-IIoT) (For using UDP-Adapter with G220)
Drivetrain Analyzer Edge (analytic app of SINAMICS drives)
Industrial Asset Hub
Asset Gateway (required for "Industrial Asset Hub")
Drive Connector SINAMICS
Provided by SIEMENS
Comprehensive integration of SINAMICS drive systems into Industrial Edge Platform for low and high-frequency data acquisition
Drive Connector SINAMICS is an Industrial Edge application which supports easy connectivity with SINAMICS drives.
Drive Connector SINAMICS provides four adapters:
High-Speed-Adapter (HS Adapter)
- Supports CU320-2 based drives SINAMICS S120, S150, G130, G150 and SIMOTION D4X5-2(integrated CU320-2).
- Supports continuous data streaming up to 8kHz. Maximum speed depends on network and drive configuration
- Requires the extension TRCDATA running on CU320-2
- Supports 2nd Generation SINAMICS S and G-type drives, V90-PN and SIMOTION D4X5-2(integrated CU320-2)
- Supports Trace configuration (e.g. number of parameters, sampling cycle, Trace duration)
- Generates time defined snapshot of the drive data
- Fingerprint triggering via IE Databus enables the user to trigger fingerprint traces via the signals that are published on IE Databus by other IE applications ( e.g. external devices such as PLCs).
- Fingerprint Adapter enables the user to receive traces that are configured via SINAMICS STARTER, Startdrive or V-Assistant by Fingerprint Adapter.
- Supports 2nd Generation SINAMICS S and G-type drives, V90-PN and SIMOTION D4X5-2(integrated CU320-2)
- Supports continuous data streaming up to 10Hz
- Supports SINAMICS G220 drives with IIoT Option Module(OM-IIoT)
- Supports continuous data streaming up to 4kHz.
- Requires IIoT Option Module(OM-IIoT) for each SINAMICS G220.
- Drive Connector SINAMICS has a dedicated Drive Status Information page for each connected 2nd Gen SINAMICS drive.
- Provides article, firmware and serial number for drive objects of each connected 2nd Gen SINAMICS drive.
- Provides basic drive status, faults and alarms and temperature data for existing drive objects of each connected 2nd Gen SINAMICS drive.
- Drive Connector SINAMICS enables "Industrial Asset Hub"(IAH) to scan, discover and onboard 2nd Gen SINAMICS drives on site. Article Number and FW version for each drive are provided via Drive Connector SINAMICS to IAH and can be visualized in "Industrial Asset Hub". "Asset Gateway", IE application is required for IAH.
- Automatic discovery of 2nd Gen SINAMICS drives on site with network scan.
- Export and import single drive configuration or single adapter configuration for Low-Speed and Fingerprint-Adapter into a new drive or a new adapter.
- Low-Speed-Adapter Simulator enables the user to simulate drive data(without a real drive) in the same format as LS adapter to be used in other IE applications such as Drivetrain Analyzer Edge.
By configuring Drive Connector SINAMICS, the target drive, drive object and signals can be selected easily.
Entitlement
A subscription for this Industrial Edge App entitles to:
- create one (1) single instance of this Industrial Edge App on an Industrial Edge Device
| Minimum Quantity | Maximum Quantity | Discount per Quantity | Subscription Term |
|---|---|---|---|
| 0 | To 24 | Yearly | |
| 25 | To 49 | 5.00% | Yearly |
| 50 | To 99 | 10.00% | Yearly |
| 100 | To Max | 10.00% | Yearly |
Total: USD $681.24
Added to cart
Key Features
Drive Connector SINAMICS provides continuously connection between SINAMICS Drives and Edge Databus with below adapters.
- High-Speed-Adapter supports continuous data acquisition up to 8kHz via Technology extension TRCDATA.
- Fingerprint-Adapter generates time defined snapshot of the drive data and supports data acquisition up to 2 kHz.
- Low-Speed-Adapter supports continuous data acquisition up to 10Hz.
- Fingerprint Adapter enables the user to trigger fingerprint traces by the signals published on IE Databus. (e.g. external devices such as PLCs).
- Fingerprint Adapter enables the user to receive traces that are configured via SINAMICS STARTER, Startdrive or V-Assistant by Fingerprint Adapter.
- UDP-Adapter supports continuous data acquistion up to 4kHz for G220 with an IIoT Option Module(OM-IIoT)
- Automatic discovery of 2nd Gen SINAMICS drives with network scan
Benefits
- Provides transparency about the status of the drive system at any time in high quality
- Enables possibilities for basic, advanced analytics and maintenance scheduling like Mechanical Anomaly Detector, Operation Analyzer, IGBT Stress Analytics and Motor Current Signature Analysis in Drivetrain Analyzer Edge.
- Enables possibilities for basic statistics like Energy Efficiency in Drivetrain Analyzer Edge.
- Compare parameters and machine status at various points in time.
- Opens doors for new innovative analysis approaches.
- Highly expandable with other Industrial Edge applications from the marketplace.
- Easy update on app functionality through central Industrial Edge Management system.
- Collects drive data for defined machine operational state by fingerprint triggering via IE Databus functionality or trace configuration via STARTER, Startdrive or V-Assistant.
Take a look
Additional Information
Thank you for your interest in our solutions for your business.
Siemens AG
Frauenauracher Straße 80, 91056 Erlangen
https://new.siemens.com/global/en/products/drives/digitalization-in-drive-technology.html