SINUMERIK Connector

Provided by SIEMENS

Increase the quality of your production by processing synchronized high- and low frequency data from your SINUMERIK CNCs.

Looking for a robust and reliable solution to get highest data qualities out of a SINUMERIK CNC?

The SINUMERIK Connector is a south bound connector of Industrial Edge that can be used to collect high and low frequency data from SINUMERIK CNCs with 

  • up to 100 high frequency data points (Tags)
  • low frequency data points, synchronized by the position control cycle time
  • high speed context information like active tool or offset
  • most minimal additional load to the SINUMERIK CNC
This connector is developed as Connectivity Suite Connector and therefore supports standardized configuration and data transfer. 

The connector is configured with the Common Configurator, which is available free of charge in the Industrial Edge Marketplace.

Industrial Edge app developers and Industrial Edge app users can utilize the data in their own applications and services. The Industrial Edge Connectors provide a unified data interface, reducing development effort for Industrial Edge apps and serving as the basis for innovative and modular software solutions.

Entitlement
A subscription for this Industrial Edge App entitles to:
  • create one (1) single instance of this Industrial Edge App on an Industrial Edge Device; and to
  • connect one (1) single SINUMERIK CNC via Industrial Edge Device's machine LAN; and to
  • configure up to 100 high frequency data points (Tags); and to
  • configure low frequency data points (Tags)
Volume Discounts: For bulk purchases and quantities over 100, you may please contact your Sales representative.

Minimum Quantity Maximum Quantity Discount per Quantity Subscription Term
0 To 24 Yearly
25 To 49 5.00% Yearly
50 To 99 10.00% Yearly
100 To Max 10.00% Yearly

The selected products cannot be added to cart. Please review and modify product selection.

Total: USD $1,548.00

USD $129.00 / year after trial period

You Save:

Disclaimer: Taxes may apply
You Save: 
Billing Term: Yearly
Subscription Term: Yearly
Access Code
Access Failed
You Purchased this Product before and cannot purchase it again
You previously purchased a trial license of this product and cannot purchase again.
Configuration should at least have one item, to add to cart
Supported payment types: Credit Card/PayPal, Payment On Account

Thank you for your interest in the MindSphere application SINUMERIK Connector . A member of the team will get in touch with you shortly about your request.

Best regards,

Your MindSphere team

Your request has been timed out. Please try again.

Added to cart

Quantity

Estimated total
Tax calculated at checkout

Key Features:
  • High frequency data provisioning from SINUMERIK CNC
  • Low frequency data provisioning from SINUMERIK CNC on change (provide one or multiple value(s) from SINUMERIK on change)
  • Cyclic low frequency data provisioning from SINUMERIK CNC (provide one or multiple value(s) from SINUMERIK with a fixed acquisition rate)
  • Uses Connectivity Suite APIs
  • Data is delivered via IE Databus and can be processed by any IED application
  • Desired SINUMERIK datapoints are configured with the Common Configurator
  • Provided data can be processed by any Industrial Edge Application

Benefits:
  • Getting data from SINUMERIK CNC with up to 100 datapoint subscriptions and a sampling rate of up to 1kHz (depending on the position control loop cycle time configured at the SINUMERIK CNC)
  • Deterministic, gapless, reliable and without negative impact on the machining process
  • Totally integrated into the Connectivity Suite concept
  • Publishing the data via IE Databus

Additional Information

Thank you for your interest in our solutions for your business.

Siemens AG

Gleiwitzer Straße 555, 90475 Nürnberg